PORSCHE 997 CHECK OUT
Can't find what you need? Try browsing the Accessories or Exploded Diagrams!Filtered by: 911 GT3 2007-11 (includes uncategorized and accessory items)
"brombacher" exhaust system for 997 GT3/rs (sound version) with rsr style tips
Facts:
- + 25 crank hp & + 25 crank torque
- 200 cell high flow, tri metal German hjs sport catalysts
- 2 3/4" tubing (70 mm) straight through design for max. Power
- equal length header set up with merge collector for maximum torque gain
- weighs 71 lbs. (32,2 kg)
- 15.5 lb (7 kg) weight savings over stock
- t 316 stainless steel for improved durability over t 304
- includes all necessary clamps and mounting brackets
- 2 x 2 3/4" (70mm) angle cut rsr center exit tips
- made in Germany
- 98 db (98db at idle and partial throttle, builds to 100db at wot)
- intoxicating growl at idle, partial throttle and wide open ...(choose a part on the right to read more)
General Fitment 911 GT3 2007-11
$8,507.40
Make a selection
Not for cars with OEM muffler. Only for plain tube (catalytic to center muffler) or bes 997… muffler. These headers and cats are perfect for those who want to run sport cats without a software program. Our latest development for the GT3 is aimed at those who are looking for more torque in the mid range, a rich, deep exhaust growl and most importantly no check engine light with stock software. These headers contain the latest hjs cats, they are nicknamed "hd" for high durability matrix design catalytic converters. They have a sm-matrix (winding of three flat and corrugated foils) and a special connection to the matrix sheath, which equates to extremely high durability for track and street use. The added ...(choose a part on the right to read more)
General Fitment 911 GT3 2007-11
From $4,183.87
Make a selection
"brombacher" exhaust system for 997 GT3/rs
Facts:
- + 25 crank hp & + 25 crank torque
- 200 cell high flow, tri metal German hjs sport catalysts
- 2 3/4" tubing (70 mm) straight through design for max. Power
- equal length header set up for maximum torque gain
- weighs 71 lbs. (32,2 kg),
- 15.5 lb (7 kg) weight savings over stock
- t 316 stainless steel for improved durability over t 304
- includes all necessary clamps and mounting brackets
- 2 x 3.5"(90mm) round center exit tips
- made in Germany
- intoxicating growl at idle, partial throttle and wide open throttle
- no dme programming necessary
FVD is proud to introduce our newest line of Brombacherexhaust systems. Brombacher exhausts...(choose a part on the right to read more)
General Fitment 911 GT3 2007-11
$8,507.40
Make a selection
Brombacher racing exhaust system for 997gt3/rs
Facts:
- + 25 crank hp & + 25 crank torque
- 200 cell high flow, tri metal German hjs sport catalysts
- 2 3/4" tubing (70 mm) straight through design for max. Power
- equal length header set up with merge collector for maximum torque gain
- weighs 42 lbs. (23 kg)
- 44.5 lb (19 kg) savings over stock system!
- t 316 stainless steel for improved durability over t 304
- includes all necessary clamps and mounting brakets
- made in Germany
- 108 db
- intoxicating growl at idle, partial throttle and wide open throttle
- no dme programming necessary
The FVD GT3 race exhaust gives the 997 GT3 a more pronounced, aggressive sound similar to the 997 cup c...(choose a part on the right to read more)
General Fitment 911 GT3 2007-11
$6,996.00
Make a selection
- + 25 crank hp & + 27 crank torque
- 200 cell high flow, tri metal German hjs sport catalysts. Cats are located behind the muffler for even greater hp & torque.
- equal length header set up with merge collector for maximum torque gain
- 2 3/4" tubing (70mm) straight through design for max. Power
- weighs 64.3 lbs. (29,2 kg)
- t 316 stainless steel for improved durability over t 304
- 2 x 3"(90mm) round tips
- cone style catalytic connection design to prevent exhaust leaks
- includes quick release clamps
- made in Germany
- 105.7 db
- intoxicating growl at idle, partial throttle and wide open throttle
- no dme programming necessary.
Weight savings:
997 GT3 OEM exhaust weight:
Stock primary ...(choose a part on the right to read more)
General Fitment 911 GT3 2007-11
$8,549.20
Make a selection
"brombacher" titanium race system (sound version) for GT3/rs
Facts:
- + 20 crank hp & + 19 crank torque.
- complete system in titanium (without sidemufflers)
- 200 cell high flow, titanium tri metal German hjs sport catalysts
- 2 x 90mm tailpipes.
- weighs 28.6 lbs (13kg)!
- 1000 degree celcius, high grade titanium material
- 105-107 db
- includes quick release clamps
- made in Germany
- modular design for 100 cell, 200 cell or bypass use
- intoxicating growl at idle, partial throttle and wide open throttle
- no dme programming necessary.
The titanium tips can be ordered ?flamed? Which exhibit?s the blue tint.
All titanium systems not created equal! Brombacher exhausts systems are nearl...(choose a part on the right to read more)
General Fitment 911 GT3 2007-11
$13,066.90
Make a selection
Kit includes:
Dme upgrade ( fast load), sport air filter
Genuine:
Engine - 6 cylinder boxer
Capacity - 3600ccm
Compression ratio - 12,0:1
Max. Power - 305kw (415hp) @ 7600rpm
Max. Torque - 405nm (299lbf ft) @ 5500rpm
Max. Speed - 310km/h
Max. Rpm - 8400rpm
Acceleration 0-100km/h - 4.3s
Tuning:
Max. Power - 314kw (427hp) @ 7500rpm
Max. Torque - 420nm (310lbf ft) @ 5500rpm
Max. Speed - 315km/h
Max. Rpm - 8700rpm
Acceleration 0-100km/h - 4.1s
For 20 years, FVD-Brombacherhas been setting the standard for Porsche tuning. FVD-Brombacherhas perfected the art of Porsche tuning making substantial gains in horsepower and torque, all while retaining the drivability and most importantly reliabi...(choose a part on the right to read more)
General Fitment 911 GT3 2007-11
$1,921.54
Make a selection
"brombacher" sport muffler for 997gt3/rs (sound version) in titanium
Facts:
- + 10 crank hp & + 10 crank torque
- 2 3/4" tubing (70mm) straight through design for max. Power
- weighs 17 lbs. (7.7 kg)
- replaces stock side mufflers and stock center muffler
- 47 lbs (21.3 kg) savings over stock system!
- 1,000 degree celcius titanium
- 2 x 3.5"(90mm) round tips
- includes all necessary clamps and mounting brackets
- made in Germany
- 105 db
- intoxicating cup car growl at idle, partial throttle and wide open throttle
- no dme programming necessary, does not alter emissions, 50 state legal in the u.s.
All titanium systems are not created equal. The titanium that we use is the highest grade ...(choose a part on the right to read more)
General Fitment 911 GT3 2007-11
$6,107.20
Make a selection
- + 25 crank hp & + 25 crank torque
- 200 cell high flow, tri metal German hjs sport catalysts
- 2 3/4" tubing (70 mm) straight through design for max. Power
- 1,000 degree celcius titanium
- equal length header set up for maximum torque gain
- weighs 48 lbs. (21,9 kg),
- 38.5 lb (17,5 kg) weight savings over stock
- includes all necessary clamps and mounting brackets
- 2 x 3.5"(90mm) blue flamed titanium center exit tips
- made in Germany
- 98 db (98db at idle and partial throttle, builds to 100db at wot)
- intoxicating growl at idle, partial throttle and wide open throttle
- no dme programming necessary
FVD is proud to introduce our newest line of Brombacherexhaust systems. Brombacher exhaus...(choose a part on the right to read more)
General Fitment 911 GT3 2007-11
$20,056.30
Make a selection
"brombacher" racing exhaust system for 997gt3/rs
Facts:
- + 25 crank hp & + 25 crank torque
- 200 cell high flow, tri metal German hjs sport catalysts
- 2 3/4" tubing (70 mm) straight through design for max. Power
- equal length header set up with merge collector for maximum torque gain
- weights 6 kg
- 33 kg savings over stock system!
- t 316 stainless steel for improved durability over t 304
- reuse?s factory center muffler for backpressure and resonance dampening.
- includes all necessary clamps and mounting brakets
- made in Germany
- 108 db
- intoxicating growl at idle, partial throttle and wide open throttle
- reuse?s factory tips or larger aftermarket tips
- no dme programming neces...(choose a part on the right to read more)
General Fitment 911 GT3 2007-11
$11,661.10
Make a selection
"brombacher" sport muffler for 997gt3/rs (sound version)
Facts:
- + 10 crank hp & + 10 crank torque
- 2 3/4" tubing (70mm) straight through design for max. Power
- weighs 28 lbs. (12.7 kg)
- replaces stock side mufflers and stock center muffler
- 36 lbs (16.3 kg) savings over stock system!
- t 316 stainless steel for improved durability over t 304
- 2 x 3.5"(90mm) round tips
- includes all necessary clamps and mounting brackets
- made in Germany
- 105 db
- intoxicating cup car growl at idle, partial throttle and wide open throttle
- no interior resonance
- no dme programming necessary, does not alter emissions, 50 state legal in the u.s.
For reference:
997 GT3 OEM exhaust weight
Stock...(choose a part on the right to read more)
General Fitment 911 GT3 2007-11
$3,128.40
Make a selection
The differences are day? And night!
Gauge faces are one of the most visible and frequently looked at components in your Porsche. Why skimp on quality? Gauge faces should have clearly visible markings and be easy to read with and without back lighting. Replacement faces should offer similar qualities, but many gauge faces on the market don?t quite make the grade. FVD gauge faces are different. What makes them different you ask? See for yourself.
In the below pictures you will see that the tiptronic is an FVD gauge face and the 6 speed gauge face is the competitions.
The daytime difference (the competition):
Darker, more yellow appearance
Raised orange warning lights, not flush
Larger, bolder script...(choose a part on the right to read more)
General Fitment PANAMERA 2010-14 911 GT3 2007-11 911 TURBO/GT2 2007-09 911 2009-12 911 2005-08 CAYMAN 2009-12 CAYMAN 2006-08 BOXSTER 2009-11 BOXSTER 2005-08
Having problems with your check engine light? Want to run cat bypass pipes or a free flowing sports catalyst set up on your vehicle without having to reprogram the dme (ecu)? This adapter offsets the oxygen sensor about 1.5 inch from the gas stream. This achieves, in most cases, a sufficient measurement for the air/co ratio and increases the tolerance range between the pre and post cat oxygen sensors. In addition, the sensitivity of the oxygen sensor is also reduced allowing you to run a nearly any exhaust or catalytic set up, including bypass pipes, without the need to reprogram your ecu! Use only for the 2nd oxygen sensor (after catalytic)!
This item may need to be sourced from Germany and would take 2-4 w...(choose a part on the right to read more)
General Fitment BOXSTER 1997-04 911 GT3 2007-11 911 2005-08 911 GT3 2003-05 911 TURBO/GT2 2001-05 911 1998-05 911 1989-94 911 1987-89 911 1984-86 911 1978-83 CAYENNE 2007-10 CAYENNE 2003-06 CAYMAN 2006-08 BOXSTER 2005-08 968 1992-95 944 1982-85 944 1985-88 944 1989-91 928 1992-95 928 1987-91 928 1983-86 924 1986-88 924 1980-85 911 1994-98
+ 15 crank hp & + 15 crank torque gain!
- a simple handheld obd2 tool is provided to flash your Cayenne conveniently at home!
- software is completely reversible and undetectable for dealer service / diagnostics / extended warranty.
- dyno proven and comprehensively tested on the autobahn and under daily driving conditions.
- all of the OEM engine software safety features are fully intact and not disabled.
- customizable for your needs (larger turbo chargers, exhausts, intercoolers, etc.).
FVD vs. The competition
- removal of the computer from the vehicle to be sent out for reprogramming is not necessary!
- our software accommodates 91-100 octane automatically (adjusts timing and knock sensors all t...(choose a part on the right to read more)
General Fitment 911 GT3 2007-11
$1,921.54
Make a selection
Led tail lights with integrated brake, fog, reverse and indicator light
- euro-approved (homologation).
- led tail light for 2005 to 2008 997.1 models.
- compatible with on-board computer*
*the canbus units are integrated into the tail light, modifications are not necessary (plug and play).
You may experience condensation with these lights. However the lights are specially designed to protect against the effects of condensation.
A frequently disputed issue is fogged glasses inside the lights, this has been around since the early 911, 964, etc. This effect occurs after driving in rain or cold nights, and is a normal physical process. Through the light vents the expanding heated air gets discharged...(choose a part on the right to read more)
General Fitment 911 GT3 2007-11 911 TURBO/GT2 2007-09 911 2005-08
+ 12 crank hp & + 15 crank torque gain!
- a simple handheld obd2 tool is provided to flash your Porsche conveniently at home!
- software is completely reversible and undetectable for dealer service / diagnostics / extended warranty.
- dyno proven and comprehensively tested on the track, the autobahn and under daily driving conditions.
- all of the OEM engine software safety features are fully intact and are not disabled.
- customizable for your needs (intakes, exhausts, etc.).
FVD vs. The competition
- removal of the computer from the vehicle to be sent out for reprogramming is not necessary!
- our software accommodates 91-100 octane automatically (adjusts timing and knock sensors all the way up to ...(choose a part on the right to read more)
General Fitment 911 GT3 2007-11
$1,988.28
Make a selection
Kit includes:
Software fastload, sport air filter, FVD race exhaust system,
Headers with 200 cell catalytic.
Genuine:
Engine - 6 cylinder boxer
Capacity - 3600ccm
Compression ratio - 12,0:1
Max. Power - 305kw (415hp) @ 7600rpm
Max. Torque - 405nm (299lbf ft) @ 5500rpm
Max. Speed - 310km/h
Max. Rpm - 8400rpm
Acceleration 0-100km/h - 4.3s
Tuning:
Max. Power - 320kw (435hp) @ 7500rpm
Max. Torque - 430nm (317lbf ft) @ 5500rpm
Max. Speed - 320km/h
Max. Rpm - 8700rpm
Acceleration 0-100km/h - 4.0s
For 20 years, FVD-Brombacherhas been setting the standard for Porsche tuning. FVD-Brombacherhas perfected the art of Porsche tuning making substantial gains in horsepower and torque, all while r...(choose a part on the right to read more)
General Fitment 911 GT3 2007-11
$6,844.40
Make a selection
+ 12 crank hp & + 15 crank torque gain!
- a simple handheld obd2 tool is provided to flash your Porsche conveniently at home!
- software is completely reversible and undetectable for dealer service / diagnostics / extended warranty.
- dyno proven and comprehensively tested on the track, the autobahn and under daily driving conditions.
- all of the OEM engine software safety features are fully intact and are not disabled.
- customizable for your needs (intakes, exhausts, etc.).
- level 1 kit includes a bmc filter
FVD vs. The competition
- removal of the computer from the vehicle to be sent out for reprogramming is not necessary!
- our software accommodates 91-100 octane automatically (adjusts timing...(choose a part on the right to read more)
General Fitment 911 GT3 2007-11
$1,782.55
Make a selection
Roof skin for racing cars
- up to 30kg weight advantage (elimination sunroof)
- kevlar / carbon mat
- adhesive mounting technology
Mounting:
Remove front and rear windows, detach roof trim left and right, drill out old roof, put new carbon roof on and glue with special adhesive technology, install front and rear windows, mount roof trim left and right.
Fits: GT3 r, 4l, 331kw (11-), GT3 rsr, 335kw (11-), 3.8l, 342kw (07-10), GT3 cup 3.8l (10-), GT3 cup s (08-09), GT3 cup 3.6l (05-07), GT3 rs, 368kw (11-), 331kw (10-), GT3, 320kw (10-), 3.6l, 305kw (07-09), GT2 rs, 456kw (11-), turbo s, 390kw (11-), turbo, 368kw (10-), GT2 (08-09), turbo (07-09), Carrera GTS4, 300kw (12-), Carrera GTS2, 300kw (10-), c...(choose a part on the right to read more)
General Fitment 911 GT3 2007-11 911 TURBO/GT2 2007-09 911 2009-12 911 2005-08
$3,518.90
Make a selection
These headers and cats are perfect for those who want to run sport cats without a software program. Our latest development for the GT3 is aimed at those who are looking for more torque in the mid range, a rich, deep exhaust growl and most importantly no check engine light with stock software.
These headers contain the latest hjs cats, they are nicknamed ?hd? For high durability matrix design catalytic converters. They have a sm-matrix (winding of three flat and corrugated foils) and a special connection to the matrix sheath, which equates to extremely high durability for track and street use. The added benefit is that they do not generate catalytic efficiency codes (check engine light) that most OEM Porsche...(choose a part on the right to read more)
General Fitment 911 GT3 2007-11
From $4,184.06
Make a selection
"brombacher" titanium race system (sound version) for 2010 GT3/rs
Facts:
- + 20 crank hp & + 19 crank torque.
- complete system in titanium (without sidemufflers)
- 200 cell high flow, titanium tri metal German hjs sport catalysts
- 2 x 90mm tailpipes.
- weighs 28.6 lbs (13kg)!
- 1000 degree celcius, high grade titanium material
- 105-107 db
- includes quick release clamps
- made in Germany
- modular design for 100 cell, 200 cell or bypass use
- intoxicating growl at idle, partial throttle and wide open throttle
- no dme programming necessary.
The titanium tips can be ordered ?flamed? Which exhibit?s the blue tint.
All titanium systems not created equal! Brombacher exhausts systems are ...(choose a part on the right to read more)
General Fitment 911 GT3 2007-11
$13,066.90
Make a selection
This 9 inch front and 11 inch rear steel fender flare set is made in Germany, we offer a complete line of replacement bodywork to complement the entire Porsche model range. Sold individually. 1 necessary per car. Please note: for conversions, these flares will allow you to run 9 wide tires in the front and 11 wide in the rear. For the 964 / 965 models the torsion bar cut out must be filled. Due to variances in production at the factory, age, accident damage or rust, each part may require trimming and or adjustment for perfect fitment.
This item may need to be sourced from Germany and would take 2-4 weeks to arrive. Once ordered it cannot be canceled. Please call to check stock or request expedited shipping.
$1,648.90
Make a selection
We go to extra lengths to ensure that our inner door pockets are made as closely to the originals as possible. They are made in Germany of abs plastic with the correct short pile carpet outer trim. Sold as a set. Right and left side fitment. 1 necessary per car.
This item may need to be sourced from Germany and would take 2-4 weeks to arrive. Once ordered it cannot be canceled. Please call to check stock or request expedited shipping.
$1,074.70
Make a selection
This is a lightweight carpet kit for a rs model or a rs tribute, without back seats. This set is made from German fine velour. We go to extra lengths to ensure that our carpets are made as closely to the originals as possible. Each is cut, sewn and trimmed to fit perfectly. Details: German fine velour made in Germany includes front floormats driver's side vinyl heel pad and side pads (like original) are also included. Custom made to order sold as a set. 1 necessary per car. Please note: when placing your order, we require the year, model and a list of any interior upgrades like roll bars, etc. This kit is custom made to order.
This item may need to be sourced from Germany and would take 2-4 weeks to arrive....(choose a part on the right to read more)
$1,700.60
Make a selection
Inlet cams:
Cam lift (valve lift) i/e (mm) = 10.7 mm
Duration°/peak timing = 280°/127-102°
Valve timing °cra (io-ic-eo-ec) = 13-87 38-62
Valve lift at tdc i/e (mm) = 0.4-3.2mm
Outlet cams:
Cam lift (valve lift) i/e (mm) = 10.7 mm
Duration°/peak timing = 272°/113°
Valve timing °cra (io-ic-eo-ec) = 69-23
Valve lift at tdc i/e (mm) = 1.5mm
This item may need to be sourced from Germany and would take 2-4 weeks to arrive. Once ordered it cannot be canceled. Please call to check stock or request expedited shipping.
$3,639.54
Make a selection
© 2024 Automobile Atlanta Inc.
505 S. Marietta Pkwy • Marietta, GA 30060 • Order By Phone: 800 792 4944 770 427 2844
|